Skip to content

medical grade silicone tubing

Check whether the quoted medical grade silicone tubing will actually interface with the existing equipment. Length, reinforcement and grade documents decide compatibility. A neighbouring word such as medical silicone tubing can be the same part or a different wall.

Compatibility roadmap for a quoted line

This is a purchase-check sequence, not an environmental claim. Silicone Tubing Sourcing does not publish PCR content, kg CO2e/kg or a 2030 factory target. Those figures, if needed, belong on a named supplier file for a named grade.

  1. Interface Measure the existing fitting, pump head or barb. Write ID and OD against that envelope.
  2. Documents Ask which length, reinforcement and grade files travel with the lot. A plant letter is not the grade.
  3. Medium and temperature Name the fluid and the °F or °C window. Silicone and FKM win in different chemical windows.
  4. Accept or re-issue If the factory proposes an alternative, rewrite the changed axes. Do not treat it as a courtesy upgrade.

File, not preference

USP Class VI, FDA 21 CFR 177 or a food-contact material (FCM) note only counts when it names the quoted grade and lot.

Origin if the plant will ask

Country of melt or finishing belongs on the offer when incoming inspection will request it. Recycled-content or reprocessed resin is a different good.

No invented ESG score

Ask the factory for any LCA or pellet-loss statement you need. This desk does not reprint a circular-materials percentage. Post-consumer recycled (PCR) content versus virgin compound is a buyer trade-off: PCR may help a packaging or ESG brief, but colour, melt stability and food-contact files can differ from virgin. Treat PCR and virgin as different goods on the request.

What has to be verified before an alternative is accepted

Silicone first versus fluoroelastomer (FKM / FFKM) is a duty trade-off. Silicone covers a wide temperature window and is often the default for medical and food-contact seals; FKM holds sealing force in oils and fuels where silicone swells. The factory has to say which construction it quoted.

ID / OD

Against the existing fitting, not a catalogue nickname.

Wall

Inches or millimetres on the alternative line.

Cure

Platinum versus peroxide written, not implied.

Hardness

Shore A method if the plant inspects durometer.

Medium

Oil, solvent or food fluid named with temperature.

File

Lot-level USP, FDA or REACH page for the swap.

Documents to request from the factory

These are grouped asks, not files hosted on this site. Use the inquiry form to name which group you need.

  • ID, OD, wall and cut length on the quoted item
  • Reinforcement type if any
  • Tolerance the factory will hold
Ask on the RFQ

  • USP Class VI or ISO 10993 only if the duty names the method
  • FDA 21 CFR 177 for a named food-contact grade and lot
  • Extractables note if the receiving plant files it
Ask on the RFQ

  • Country of melt or finishing if incoming inspection will ask
  • New versus leftover or reprocessed resin
  • Coil, reel or cut-to-length packing next to the money figure
Ask on the RFQ

Send the interface you already have

A photo or a competitor part number is a starting point, not a specification. The form keeps missing fields visible.

Request Factory Quotes